Fass FA D10 125G Manuel d'utilisateur télécharger pdf (Page 3)

FASS Recommended Application

FA D10 125G

Cummins (12 Valve) 1994-1998 with stock - moderate horsepower

modifications

Note: Due to the increase of fuel flow you may encounter a problem with the stock fuel

module. Adding a FASS suction tube kit will solve that issue.

¡WARNINGS!

 Read all instructions before starting installation of this product!

 Installing the improper FASS Pump can cause severe engine damage.

 Secure vehicle from ROLLING!

 Use caution when drilling. Steer clear of any electrical wires , air lines or other damageable

components.

 Consult vehicle’s manufacturers’ instructions concerning the electrical system before at-

tempting any electrical connections.

 Be sure that the serial # on this installation manual matches that of the outside of the box.

 Flush and clean all brass fittings and fuel line from debris.

 Keep debris from entering the internals of the system during installation. Getting debris in

the “T” port can lock up the motor. If the motor does lock up from debris call FASS for

technical assistance.

 Be sure to utilize the inline fuel filter included in this kit, or the equivalent, to prevent a

motor lock up.

 Wear safety glasses when operating power tools such as drills and grinders or when using a

punch or chisel.

 Properly secure lines to prevent chaffing.

Serial #

1 2 3 4 5 6 7 8 ... 17 18

Pas de commentaire

Fass FA D10 125G Manuel d'utilisateur Page 3